Rigol DS1000Z Series User Manual

RIGOL Chapter 13 Store and Recall
DS1000Z User’s Guide
13-14
Factory
Press Storage Default to return the oscilloscope to its factory state (refer to the
table below).
Table 0-1 Factory
Parameter Factory
Horizontal Setting (HORIZONTAL)
Vertical Setting (VERTICAL)
Acquisition Setting (Acquire)
Trigger Setting (TRIGGER)
Display Setting (Display)
Signal Source
Cursor Setting (Cursor)
Storage Setting (Storage)
Utility Function Setting (Utility)
Math Operation Setting (MATH

Operation)
Protocol Decoding (MATH

Decode1/Decode2)
Reference Waveform Setting (REF)
Horizontal Setting (HORIZONTAL)
Horizontal Time Base 1 μs
Horizontal Offset 0 s
Delayed Sweep OFF
Time Base Type YT
Vertical Setting (VERTICAL)
Vertical Scale 200 mV
Vertical Offset 0 V
CH1 Switch ON
CH2 Switch ON
CH3 Switch ON
CH4 Switch ON
Channel Coupling DC
Bandwidth Limit OFF
Probe Ratio 1X

Rigol DS1000Z Series Specifications

General

Brand	Rigol
Model	DS1000Z Series
Category	Test Equipment
Language	English