Rigol DS6104 User Manual

6 To Make Measurements RIGOL
DS6000 User’s Guide 6-27
All Measurement
All measurement could measure all the time, voltage and area parameters (each
measurement source has 21 items, measurements can be performed on the five
measurement sources at the same time) of the current measurement source and
display the results on the screen. Press MEAS  Display All to turn the function on
or off. Press Measure Source and use to select the channel to be measured
(CH1 to CH4 and MATH).
 When Display All is "On", one-key measurement is also valid.
 "To Clear the Measurement" will not clear all the measurement results.

Rigol DS6104 Specifications

General

Brand	Rigol
Model	DS6104
Category	Test Equipment
Language	English