1 Quick Start RIGOL
DS6000 User’s Guide 1-25
Function Keys
ACQ: press this key to enter sample setting
menu to set the acquisition mode, the sampling
mode, the memory depth and the anti-aliasing
function of the oscilloscope.
CURS: press this key to enter cursor
measurement menu. The oscilloscope provides
three cursor modes: manual, track and auto.
SAVE: press this key to enter the file store and
recall interface. The file types include traces,
waveforms, setups, picture and CSV. The
oscilloscope supports internal and external
storages as well as disk management.
DISP: press this key to enter the display setting menu. Through this menu, you can
set the display type, persistence time and wave intensity of the waveform as well as
the grid type, grid brightness and menu display time of the screen.
UTIL: press this key to enter the system function setting menu. Through this
menu, you can set the system-related functions or parameters, such as I/O setting,
sound and language. The oscilloscope also supports some advanced functions such
as pass/fail test, waveform record and print setting.
HELP: press this key to turn on the help interface. For detailed information, please
refer to the introduction in "Built-in Help System".
Record
Play/Pause: in stop or pause state, press this key to play back the
waveform and press again to pause the play. The backlight is
illuminated in yellow.
Stop: press this key to stop the waveform in record or playback
mode. The backlight is illuminated in orange.
Record: press this key to start recording the waveform. The
backlight is illuminated in red.
To Next Page
Loading...
Need help?
General
