Rigol DS6104 User Manual

RIGOL 6 To Make Measurements
6-28 DS6000 User’s Guide
Statistic Function
Make statistic and display the current, average, minimum (or standard deviation) and
maximum (or count) values of at most 5 measurement items that are turned on last.
 Press Measure  Statistic to turn the statistic function on or off. When the
statistic function is enabled, press Mode to select "Extremum" or "Difference"
measurement. When "Extremum" is selected, the current value, average value,
minimum value and maximum value are displayed. When "Difference" is
selected, the current value, average value, standard deviation and count value
are displayed.
Extremum Measurement Difference Measurement
 Press MEAS  Reset to clear the history data and make statistic again.
Measurement History
To view the history measurement data, press MEAS  History  History  "On".
The history data can be displayed in two modes:
 Graph: display the results of multiple measurements of at most 5 measurement
items that are turned on last in graph mode. The measurement points are
connected using linear interpolation.
 Table: display the results of the last 10 measurements of at most 5
measurement items that are turned on last in table mode.

Rigol DS6104 Specifications

General

Brand	Rigol
Model	DS6104
Category	Test Equipment
Language	English