Rigol DS6104 User Manual

3 To Set the Horizontal System RIGOL
DS6000 User’s Guide 3-9
Horizontal Scale
Being similar to "Vertical Scale
", the horizontal scale adjustment has two modes:
"Coarse" and "Fine".
Press MENU (in the horizontal control area (HORIZONTAL) on the front panel) 
ScaleAdjust to select the desired mode. Turn HORIZONTAL SCALE to adjust
the horizontal scale. Turn clockwise to reduce the horizontal scale and turn
counterclockwise to increase the scale.
The scale information (e.g.
) at the upper-left corner of the screen will
change accordingly during the adjustment. The adjustable range of horizontal scale
is related to the model of the instrument.
DS610X: 500 ps/div to 1.000 ks/div
DS606X: 1 ns/div to 1.000 ks/div
 Coarse (take counterclockwise as an example): set the horizontal scale in 1-2-5
step namely 500 ps/div, 1 ns/div, 2 ns/div, 5 ns/div…1.000 ks/div.
 Fine: further adjust the horizontal scale at relatively smaller step.
Horizontal Position
Turn HORIZONTAL
POSITION to adjust the horizontal position. Turning the
knob clockwise to reduce the position and turning the knob counterclockwise to
increase the position. Pressing down the knob can quickly reset the horizontal
position or the delayed sweep position to 0.
In addition, to adjust the horizontal position with a small step value, you can perform
the following operations: rotate the inner knob of the navigation knob
; or press
MENU on the HORIZONTAL control area, and select Offset, then rotate the knob
. To quickly adjust the horizontal position within a relatively larger range, you can
rotate the outer knob of the navigation knob
. (The greater the rotation
amplitude of the outer knob, the faster the variations in the values.)

Rigol DS6104 Specifications

General

Brand	Rigol
Model	DS6104
Category	Test Equipment
Language	English