Rigol DS6104 User Manual

6 To Make Measurements RIGOL
DS6000 User’s Guide 6-11
Advanced Operation
DS6000 provides advanced operation function that allows user-defined operation
functions. Press MATH  Operate  "Advanced"  Expression  "On", and the
editing window as shown in the figure below is displayed on the screen.
Turn to select any item (if they are currently available for selection) in "Channel",
"Function", "Variable", "Operator" and "Figure", then press down the knob and the
item selected will de displayed in the entry box on the right of "Expression".
During the expression edit, you can press Delete to delete the character currently at
the left of the cursor and press Clear to delete all the characters in the entry box at
any time. After finishing the expression edit, press Apply and the oscilloscope will
operate according to the expression you set and display the result. Note: After
pressing Apply, the Expression menu will be automatically set to "OFF" but the
preset expression will still be displayed at the bottom of the screen for your reference.
You can press Invert to turn the invert display of the operation results on or off. You
can also press Label to turn on the label modifying interface and refer to the
introduction in "
Channel Label" to set the label of the math operation waveform.
Note: The new label can include uppercase English letters (A to Z), lowercase English
letters (a to z), numbers (0 to 9), underlines and spaces and the length cannot exceed
4 characters.

Rigol DS6104 Specifications

General

Brand	Rigol
Model	DS6104
Category	Test Equipment
Language	English