Rigol DS6104 User Manual

RIGOL 12 Store and Recall
12-12 DS6000 User’s Guide
To Create a New File or Folder
This operation is only valid in external storage. Before using external store and recall,
make sure that a USB storage device is connected correctly.
First, press SAVE  Disk Manage and use to select and open the external disk
("Disk D" or "Disk E").
Second, select the desired directory under which to create a new file or folder. The
default is the root directory of the USB storage device.
Then, press File Type to select the desired file type and press New File or New
Folder to turn on the interface as shown in the figure below.
This oscilloscope supports Chinese/English input method. The file name or folder
name can contain letters, numbers, underlines, spaces and Chinese characters and
the length of the characters is limited to 31 bytes. The following part introduces how
to input a file name or folder name using Chinese/English input method.
Operation Tip
During the
name input, use the menu softkeys to select different operation areas,
then turn to select the desired content and press down to input the
content selected.

Rigol DS6104 Specifications

General

Brand	Rigol
Model	DS6104
Category	Test Equipment
Language	English