Rigol DS6104 User Manual

1 Quick Start RIGOL
DS6000 User’s Guide 1-7
To Use the Battery
This oscilloscope also provides optional rechargeable battery. Please install the
battery by referring to the figure below. When the instrument leaves the factory, the
battery holds certain electricity. When using the battery alone for power supply, a
battery icon
and the remaining electricity (not displayed when the AC power
and battery are used at the same time) will be displayed at the lower-right corner of
the screen. When the electricity of the battery is too low, "Low Battery!" will be
displayed.
If you need to recharge the battery, please install the battery correctly and then
connect the oscilloscope to AC power supply to recharge the battery following the
instructions in "To Connect to AC Power Supply". It needs about 15 hours for
recharging the battery.
Figure 1-6 To Install the Battery
Battery

Rigol DS6104 Specifications

General

Brand	Rigol
Model	DS6104
Category	Test Equipment
Language	English