Rigol DS6104 User Manual

13 System Function Setting RIGOL
DS6000 User’s Guide 13-15
To Print the Waveform
To Connect the Print Device
DS6000 oscilloscope supports normal and PictBridge printers; you can set the print
parameters and print the current screen image. The connection modes of different
print devices are different. Use the USB HOST interface (one on the front panel and
rear panel respectively) to connect normal printer and use the USB DEVICE interface
to connect PictBridge printer.
After the printer is connected, press UTIL  Print  Print Mode to set the print
mode to "Normal" or "PictBridge" according to the printer currently connected. When
PictBridge printer is connected, you also need to press UTIL  IO Setting  USB
Device to select "PictBridge".
To Connect Normal Printer To Connect PictBridge Printer

Rigol DS6104 Specifications

General

Brand	Rigol
Model	DS6104
Category	Test Equipment
Language	English