Rigol DS6104 User Manual

1 Quick Start RIGOL
DS6000 User’s Guide 1-29
7. Trigger Position
Display the trigger positions of the waveform in the waveform memory and
on the screen.
8. Horizontal Position
Use HORIZONTAL
POSITION to modify this parameter. Press down
the knob to automatically set the parameter to zero.
9. Trigger Type
Display the currently selected trigger type and trigger condition setting.
Different labels are displayed when different trigger types are selected.
For example,
represents triggering on the rising edge in "Edge" trigger.
10. Trigger Source
Display the trigger source currently selected (CH1-CH4, EXT, EXT/5 or AC
Line). Different labels are displayed when different trigger sources are
selected and the color of the trigger parameters (include the "Trigger
Type", "Trigger Source" and "Trigger Level") corresponds to the trigger
source currently selected.
For example,
denotes that CH1 is selected as the trigger source.
11. Trigger Level
 When the trigger source is CH1 to CH4, the trigger level value is
displayed and the trigger level icon (
) is displayed at the right of the
screen.
Note: In slope trigger, there are two trigger levels; the difference
between the two trigger levels is displayed at the upper-right corner of
the screen and two trigger level labels (
and ) are displayed at
the right side of the screen at the same time. For the detailed
information, please refer to the introduction in "Vertical Window" on
page 5-13.
 When the trigger source is EXT or EXT/5, the trigger level value is
displayed and no trigger level icon is displayed.
 When the trigger source is AC line, there is no trigger level.
 When using TRIGGER
LEVEL to modify the trigger level, the
trigger level value will change with the up and down of the trigger level
icon.

Rigol DS6104 Specifications

General

Brand	Rigol
Model	DS6104
Category	Test Equipment
Language	English