Rigol DS6104 User Manual

RIGOL 7 Protocol Decoding
7-14 DS6000 User’s Guide
adjustable range of the timeout time is from 100 ns to 1 s. The default is 1
μs.
 When "CS" is selected, press SS to enter the SS (chip select line) setting
interface.
― Press Channel and select any channel of CH1 to CH4 as the CS
channel.
― Press Polarity to set the polarity of the chip select channel to high
(
) or low ( ).
― Press Threshold to set the threshold of the chip select channel.
2. SCLK Setting
Press SCLK to turn on the clock line setting interface.
 Press Channel to select any channel (CH1-CH4) as the clock channel.
 Press Slope to set the oscilloscope to sample MISO and MOSI on the rising
edge (
) or falling edge ( ) of SCLK.
 Press Threshold to set the threshold of the clock channel.
3. MISO Setting
Press MISO to turn on the MISO data line setting interface.
 Press Channel to select any channel (CH1 to CH4) as the MISO channel.
When "None" is selected, this data line will not be set. Note: When the
MOSI data line is set to "None", the MISO data channel cannot be set to
"None".
 Press Polarity to set the polarity of the MISO data line to high ( ) or
low (
).
 Press Threshold to set the threshold of the MISO data line.
4. MOSI Setting
Press MOSI to turn on the MOSI data line setting interface.
 Press Channel to select any channel (CH1-CH4) as the MOSI channel.
When "None" is selected, this data line will not be set. Note: When the
MISO data line is set to "None", the MOSI data channel cannot be set to
"None".
 Press Polarity to set the polarity of the MOSI data line to high ( ) or
low (
).
 Press Threshold to set the threshold of the MOSI data line.

Rigol DS6104 Specifications

General

Brand	Rigol
Model	DS6104
Category	Test Equipment
Language	English