14 Remote Control RIGOL
DS6000 User’s Guide 14-7
6. Load LXI webpage
As this oscilloscope conforms to LXI-C standards, you can load LXI webpage
through Ultra Sigma (right-click the resource name and select "LXI-Web").
Important information about the oscilloscope including the model number,
manufacturer, serial number, description, MAC address and IP address will be
displayed on the webpage.
In the LXI webpage, click "Network Settings" at the left side; then, input the
initial password "111111" in the pop-up window (by default, the user name is
empty) and click "OK" to view or modify the current network settings of the
instrument. Besides, you can click "Security" to reset the password.
Tip
You can also load the LXI webpage by entering the IP address of the
instrument in the address bar of the PC browser.
To Next Page
Loading...
Need help?
General
