Chapter 2 General notes for service technicians
SMSO-2-02.02- 15.07.03 15
Description of part
Part
no.
After 45,000 coffee serv-
ings or after 12 months
After xx months or
max. counter reading
C R R
Pump inlet filter 067‘186
16
36 months
Hose connection 067‘766
17
36 months
Outlet house w/o refrigerator
Outlet hose with refrigerator
063‘353
063‘345
18
18
36 months
2.3 Instructions on check numbers 1-22
Note 1
Make a visual check of the instant heater 065’111 / 061’164
and the steam generator 061’156.
If one of the elements is not watertight and is indicating
traces of calcium externally at the heater connections or
the welded seams, it should be replaced.
If one of the elements on the interior has heavy deposits
of calcium. It should be replaced.
The instant heater and the steam generator must not be
decalcified.
Make a note of the check on the test certificate (see
section on “safety-relevant parts”).
Note 2
Make a visual check for seal and calcium deposits, pay
special attention to the drilled holes at the side.
If the drilled holes on the side are clogged with calcium
deposits, this normally means that the safety valve is
faulty. This means that some water is always flowing back
through the safety valve.
Note 3
Visual check for calcium deposits, damage,
contamination and seal of pipe.
Note 4
Check the drilled hole in the booster for calcium deposits and
coffee residues. If it is heavily soiled, the booster must be
completely replaced. Check the booster temperature (110
o
C)
after the machine has been switched on.
Note 5
Visual check for calcium deposits and seal
Note 6
Visual check for calcium deposits and wear on the seal.
Note 7
General condition of the motor. The “grinder empty”
message must be checked.
To Next Page
Loading...
Need help?
General
