96
COIN SELECTOR
12
COIN SELECTOR
12
Handling the Coin Jam
If the coin is not rejected when the REJECT button is pressed, open the coin chute door and open the selector gate.
After removing the jammed coin, put a normal coin in and check to see that the selector correctly functions.
Cleaning the Coin Selector
The Coin Selector should be cleaned once every 3 months.
When cleaning, follow the procedure below:
1
Turn the power for the machine OFF. Open the coin chute door.
2
Remove the Coin Selector from the coin chute door.
3
Open the gate and dust off by using a soft brush (made of wool,
etc.).
FIG. 12a
● Removeandcleansmearsbyusingasoftclothdippedinwaterordiluted
chemicaldetergentandthensqueezeddry.
● Neverapplymachineoil,etc.totheCoinSelector.
● AftercleaningtheCoinSelector,insertaregularcoininthenormalworkingsta-
tus
andensurethattheselectorcorrectlyfunctions.
GATE