Siemens SIMATIC RF650R User Manual

Programming via XML interface
10.3 XML commands
SIMATIC RF650R/RF680R/RF685R
Configuration Manual, 03/2018, C79000-G8976-C386-06
197
Parameter
Parameter
Type
Values
Description
value_id Decimal value
0...9
0...4294967295 Unique command identifier
value_iPAddress IP address 1.0.0.1…
255.255.255.254
IP address of the reader
Parameter is ignored, if DHCP is acti-
vated:
value_dHCPEnable = True
value_
subNetMask
IP address 1.0.0.1…
255.255.255.254
Subnet mask of the reader
Parameter is ignored, if DHCP is acti-
vated:
value_dHCPEnable = True
value_gateway IP address 1.0.0.1…
255.255.255.254
Gateway of the reader
Parameter is ignored, if DHCP is acti-
vated:
value_dHCPEnable = True
value_
dHCPEnable
Fixed values True
False
Use of DHCP to assign the IP address.
10.3.1.5
getIPConfig
This command is available as of API V2.2.
The current IP address of the reader is read out with this command.
Command
<frame>
<cmd>
<id> value_id </id>
<getIPConfig/>
</cmd>
</frame>

Siemens SIMATIC RF650R Specifications

General

Brand	Siemens
Model	SIMATIC RF650R
Category	Other
Language	English