1-12
50
When the mode dial is set to ([MOVING IMAGE] is set to
[MPEG MOVIE] in the setup settings.)
(P. QUALITY)
x
FINE Records still images in the fine image quality
mode.
STANDARD Records still images in the standard image
quality mode.
MODE
(REC
MODE)
TIFF Records a TIFF (uncompressed) file in addition
totheJPEGfile(page62).
TEXT Records a GIF file in black-and-white (page 61).
VOICE Records an audio file (with a still image) in
addition to the JPEG file (page 60).
E-MAIL Records a small-size (320×240) JPEG file in
addition to the selected image size (page 59).
EXP BRKTG
(MVC-CD300
only)
Records three images with the exposure value of
each image shifted a little (page 63).
BURST (MVC-
CD300 only)
Records three images continuously (page 59).
x
NORMAL Records an image using the normal recording
mode.
±
(FLASH
LEVEL)
HIGH Makes the flash level higher than normal.
x
NORMAL Normal setting.
LOW Makes the flash level lower than normal.
PFX
(P. EFFECT)
SOLARIZE
B&W
SEPIA
NEG.ART
x
OFF
Sets the image special effects (page 69).
(
SHARPNESS
)
+2 to –2 Adjusts the sharpness of the image.
The indicator appears (except when the
setting is 0).
Item Setting Description
WB
(WHITE
BAL)
ONE PUSH
x
AUTO
IN DOOR
OUT DOOR
Sets the white balance (page 68).
(IMAGE
SIZE)
320 (HQ)
320×240
x
160×112
Selects the MPEG image size when recording
moving images (page 53).
Item Setting Description
Before performing advanced operations
51
When the mode dial is set to ([MOVING IMAGE] is set to
[CLIP MOTION] in the setup settings.)
When the mode dial is set to
PFX
(P. EFFECT)
SOLARIZE
B&W
SEPIA
NEG.ART
x
OFF
Sets the image special effects (page 69).
Item Setting Description
WB
(WHITE
BAL)
ONE PUSH
x
AUTO
IN DOOR
OUT DOOR
Sets the white balance (page 68).
(IMAGE
SIZE)
x
NORMAL
MOBILE
Selects the Clip Motion image size (page 53).
±
(FLASH
LEVEL)
HIGH Makes the flash level higher than normal.
x
NORMAL Normal setting.
LOW Makes the flash level lower than normal.
PFX
(P. EFFECT)
SOLARIZE
B&W
SEPIA
NEG.ART
x
OFF
Sets the image special effects (page 69).
(
SHARPNESS
)
+2 to –2 Adjusts the sharpness of the image.
The indicator appears (except when the
setting is 0).
Item Setting Description
DELETE OK Deletes the displayed image (page 77).
CANCEL Cancels deleting of the image.
PROTECT – Protects images against accidental erasure
(page 78).
PRINT – Marks the print mark on still images (page 81).
Item Setting Description
52
∗ Only in single-image mode.
SLIDE*
INTERVAL
Sets the slide show interval.
x
5 sec/10 sec/30 sec/1 min
REPEAT A slide show can be repeated for up to approx.
20 minutes.
x
ON/OFF
START Starts the slide show.
CANCEL Cancels the slide show.
RESIZE* MVC-CD200
1600×1200
1024×768
640×480
CANCEL
MVC-CD300
2048×1536
1600×1200
1280×960
640×480
CANCEL
Changes the recorded image size (page 80).
ROTATE* – Rotates the still image (page 75).
Item Setting Description
Before performing advanced operations
53
Setting the image size (IMAGE SIZE)
1
Set the mode dial to , S, A, M, SCN, or .
2
Press MENU.
The menu appears.
3
Select the desired image size with
v
/
V
on the control button from
[ ] (IMAGE SIZE).
Still image sizes:
MVC-CD200: 1600×1200, 1600 (3:2)*, 1024×768, 640×480
MVC-CD300: 2048×1536, 2048 (3:2)*, 1600×1200, 1280×960, 640×480
∗ The image is recorded in the ratio of three to two to fit the printing paper size. Using this
image size, the margin of an image is not printed out. However, the slight amount of the
upper and lower black portions are displayed on the LCD screen.
Moving image (MPEG movie) sizes:
320 (HQ)*, 320×240, 160×112
∗ High Quality mode
Moving image (Clip Motion) sizes:
MOBILE (80×72), NORMAL (160×120)
3
2
1
Control button
To Next Page
Loading...
Need help?
General
