5-16
5. Picture Frame Setting
Mode Still (Auto ( ))
Subject Color bar chart
(Color reproduction adjustment frame)
[MVC-CD200]
Approx. 34cm from the front of the lens
[MVC-CD300]
Approx. 28cm from the front of the lens
Measurement Point Video output terminal
Measuring Instrument Oscilloscope and TV monitor
Specified Value A=B, C=D, E=F
Switch setting:
ZOOM .................................................................... WIDE end
FOCUS............................................................ Manual (0.3m)
Setting method:
1) Select page: 4, address: 06, and set data: 01.
2) Shoot the color bar chart with the zoom WIDE end.
3) Adjust the direction and distance between the pattern box and
camera, and set the picture frame to the specified position.
4) Mark the position of the picture frame on the monitor display,
and adjust the picture frame to this position in following
adjustments using “Color reproduction adjustment frame”.
5) Select page: 4, address: 06, and set data: 00.
Check on an oscilloscope
1. Horizontal period
Fig. 5-1-10.
2. Vertical period
Fig. 5-1-11.
Check on the monitor TV (Underscanned mode)
Fig. 5-1-12.
Color bar chart picture frame
Effective picture fram
A=B
C=D
A
B
C
D
To Next Page
Loading...
Need help?
General
