30
9
Check the version using MAINTENANCE
>MODEL INFO.
About the RM-IP Setup Tool
This is a software tool for configuring remote
controller settings. It is used to configure the
following.
• IP address settings
• Camera assignments
• Swapping camera numbers
• Checking camera tables
Install the software on the setup PC for the unit.
The setup tool software and setup tool guide can
be
downloaded from the download site.
For details, refer to the RM-IP Setup Tool guide.
Note
To use the RM-IP Setup Tool, set MAINTENANCE
>UPDATE MODE to ON in the RM menu.
To Next Page
Loading...
