Sony RM-IP500 User Manual

68
RM Menu List
OPERATION
You can check and change camera menu
settings while operating a camera. This menu is
also used to set and change the speed of
movement between positions when using the
preset memory function.
During operation, the settings of the OPERATION
me
nu setup items display the settings
configured on the camera.
Accordingly, default settings are not indicated in
t
he description of each setting.
To store the settings changed using this menu,
u
se the preset memory function of the camera.
For details about items saved with a preset
number, refer to the operating instructions of
each camera.
Notes
• Items that cannot be set on the selected
camera display “---” as the setting.
• Depending on the camera model, the settings
di
splayed on the unit and camera menu display
may not be the same. In this case, the settings
displayed in the camera menu are the actual
settings.
• When changing a setting, there may be some
de
lay before the display is updated.
EXPOSURE
Sets the exposure compensation function of the
target camera.
EX-COMP
Turns the exposure compensation mode on/off.
AE LEVEL
Sets the control level for automatic camera
brightness control (exposure compensation
level).
Menu item Sub menu
item
Setup item See
OPERATION
page 68
EXPOSURE EX-COMP page 68
AE LEVEL page 68
ND FILTER page 69
WHITE WB MODE page 69
R. WHITE page 69
B. WHITE page 69
OFFSET page 69
BLACK ABB MODE page 69
R. BLACK page 69
B. BLACK page 69
M. BLACK page 69
DETAIL SETTING page 69
LEVEL page 69
KNEE SETTING page 69
KNEE MODE page 70
POINT page 70
SLOPE page 70
MATRIX MATRIX page 70
SELECT page 70
OTHER PRST SPEED page 70
CIZ page 70
TELE CONV page 70
CONFIG
page 73
RM SETUP AE CONFIG page 73
AE CONFIG2 page 73
CAM POWER page 74
ZOOM page 74
CAMERA page 74
LCD BRIGHT
page 74
LAMP DIMMER page 74
SW ASSIGN ASSIGN1 to 6 page 51
IRIS KNOB page 51
DIRECTION
JOYSTICK PAN page 74
JOYSTICK TILT page 74
ZOOM LEVER page 74
FOCUS DIAL page 75
GPI I/O SETTING page 75
TALLY MODE page 75
COMMAND SEL page 75
CAMERA LINK page 75
LAN page 76
SERIAL page 76
CONTROL I/F page 76
AUTO IP SETUP
page 76
SETUP IP page 76
ASSIGN CAM page 76
CLEAR TABLE page 76
SWAP CAM page 76
MANUAL page 76
CAMERA TABLE page 77
MAINTENANCE
page 77
MODEL INFO MODEL page 77
S/NO page 77
VERSION page 77
UPDATE MODE page 77
RESET page 78
JOYSTICK SENSITIVITY page 78

Sony RM-IP500 Specifications

General

Interface	Wired
Product color	Black
Brand compatibility	Sony
Remote control proper use	-
Quantity per pack	1 pc(s)
Storage temperature (T-T)	-20 - 60 °C
Operating temperature (T-T)	0 - 40 °C
Built-in display	Yes
Maximum range	- m
I/O ports	RJ-45, D-Sub 15-pin, DC
Rechargeable	No
Harmonized System (HS) code	85299097

Weight and Dimensions

Depth	224.1 mm
Width	306 mm
Height	159.3 mm
Weight	2400 g