1E-4 Engine Lubrication System:
6) Stop the engine and remove the oil pressure gauge
and attachment.
7) Reinstall the main oil gallery plug and tighten it to the
specified torque.
CAUTION
!
Use a new O-ring to prevent oil leakage.
Tightening torque
Main oil gallery plug: 40 N·m (4.0 kgf-m, 29.0 lb-
ft)
8) Check the engine oil level. Refer to “Engine Oil and
Filter Replacement: in Section 0B”.
Repair Instructions
Engine Oil and Filter Replacement
B649G11506001
Refer to “Engine Oil and Filter Replacement: in Section
0B”.
Oil Cooler / Oil Cooler Hose Removal and
Installation
B649G11506002
Refer to “Oil Cooler / Oil Cooler Hose Removal and
Installation: in Section 1F”.
Oil Cooler / Oil Cooler Hose Inspection
B649G11506003
Refer to “Engine Cooling System Inspection: in Section
1F”.
Oil Cooler Cleaning
B649G11506022
Refer to “Oil Cooler Cleaning: in Section 1F”.
Oil Pan / Oil Sump Filter / Oil Pressure
Regulator Removal and Installation
B649G11506023
Removal
1) Drain engine oil. Refer to “Engine Oil and Filter
Replacement: in Section 0B”.
2) Remove the exhaust pipe and muffler. Refer to
“Exhaust Pipe / Muffler Removal and Installation: in
Section 1K”.
3) Remove the oil cooler hose union bolts. Refer to “Oil
Cooler / Oil Cooler Hose Removal and Installation:
in Section 1F”.
4) Remove the oil pan (1).
5) Remove the shim (2) and O-ring (3).
6) Remove the oil sump filter (4).
7) Remove the oil pressure regulator from the oil pan.
1
I649G1150003-02
2
3
4
I649G1150004-02
I649G1150005-03
To Next Page
Loading...
Need help?
General
