9A-7 Wiring Systems:
Specifications
Service Data
B649G19107002
Electrical
Tightening Torque Specifications
B649G19107003
NOTE
The specified tightening torque is also described in the following.
“Wiring Harness Routing Diagram: ”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications: in Section
0C”.
2
6
7
3
5
4
FWD
(a)
(b)
1
I649G1910906-03
1. Generator 4. Gear position switch 7. Cooling hose
2. Starter motor 5. Engine ground wire : 6 N⋅m (0.6 kgf-m, 4.5 lb-ft)
3. Starter motor lead wire 6. CKP sensor lead wire : 25 N⋅m (2.5 kgf-m, 18.0 lb-ft)
Item Specification Note
Fuse size
Headlight
HI 10 A
LO 10 A
Ignition 15 A
Signal 15 A
Meter 10 A
Main 30 A
To Next Page
Loading...
Need help?
General
