1I-16 Starting System:
Specifications
Service Data
B649G11907002
Unit: mm (in)
Tightening Torque Specifications
B649G11907003
NOTE
The specified tightening torque is also described in the following.
“Starter Motor Components: ”
“Starter Clutch Components: ”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications: in Section
0C”.
Item Specification Note
Starter motor brush length
Standard 12.5 (0.49)
Limit 6.0 (0.24)
Starter relay resistance 3 – 6 Ω
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Starter motor mounting bolt 6 0.6 4.5 )
Starter motor lead wire nut 5 0.5 3.5 )
Cooling hose mounting bolt 10 1.0 7.0 )
Starter motor housing bolt 6.5 0.65 4.7 )
Starter clutch mounting bolt 150 15.0 108.5 )
To Next Page
Loading...
Need help?
General
