Suzuki 2005 GSF1200 User Manual

4A-14 Brake Control System and Diagnosis:
Assembly
Assemble the master cylinder in the reverse order of
disassembly. Pay attention to the following points:
CAUTION
!
• Wash the master cylinder components with
new brake fluid before reassembly.
• Do not wipe the brake fluid off after
washing the components.
• When washing the components, use the
specified brake fluid. Never use different
types of fluid or cleaning solvents such as
gasoline, kerosine, etc.
• Apply brake fluid to the master cylinder
bore and all of the master cylinder
component to be inserted into the bore.
BF: Brake fluid (DOT 4)
• Apply SUZUKI SILICONE GREASE to the push rod
end.
: Grease 99000–25100 (SUZUKI Silicone
Grease or equivalent)
• Install the O-ring (1).
CAUTION
!
Replace the O-ring (1) with a new one.
Rear Brake Master Cylinder Parts Inspection
B649G14106034
Refer to “Rear Brake Master Cylinder Disassembly and
Assembly: ”.
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
Piston
Inspect the piston surface for any scratches or other
damage.
Rubber Parts
Inspect the primary cup, secondary cup and dust boot
for wear or damage.
I649G1410036-01
I649G1410041-02
1
I649G1410037-01
I649G1410038-01
I649G1410039-01

Suzuki 2005 GSF1200 Specifications

General

Brand	Suzuki
Model	2005 GSF1200
Category	Motorcycle
Language	English