Starting System: 1I-5
Repair Instructions
Starter Motor Components
B649G11906013
3
7
10
(b)
12,
4
5
4
2
1
(a)
11,
13
6
8
9
(c)
I649G1190005-03
1. O-ring 6. Armature 11. Starter motor lead wire nut : 6.5 Nâ‹…m (0.65 kgf-m, 4.7 lb-ft)
2. Housing end (Inside) 7. Washer set 12. Starter motor mounting bolt : Apply grease to sliding surface.
3. Washer set 8. Brush holder 13. O-ring : Apply moly past to sliding surface.
4. O-ring 9. Brush spring : 5 Nâ‹…m (0.5 kgf-m, 3.5 lb-ft) : Apply thread lock to thread part.
5. Starter motor case 10. Housing end (Outside) : 6 Nâ‹…m (0.6 kgf-m, 4.5 lb-ft) : Do not reuse.