Suzuki 2005 GSF1200 User Manual

5C-10 Clutch:
• Apply SUZUKI SILICONE GREASE to the push rod
end.
: Grease 99000–25100 (SUZUKI Silicone
Grease or equivalent)
• When installing the clutch lever position switch, align
the projection on the switch with the hole in the master
cylinder.
• Apply SUZUKI SILICONE GREASE to the clutch lever
pivot bolt when installing.
: Grease 99000–25100 (SUZUKI Silicone
Grease or equivalent)
Tightening torque
Clutch lever pivot bolt: 1.0 N·m (0.1 kgf-m, 0.72
lb-ft)
Clutch lever pivot bolt lock-nut: 6.0 N·m (0.6 kgf-
m, 4.5 lb-ft)
Clutch Master Cylinder Parts Inspection
B649G15306017
Refer to “Clutch Master Cylinder / Clutch Lever
Disassembly and Assembly: ”.
Master Cylinder
Inspect the master cylinder bore for any scratches or
other damage.
Piston
Inspect the piston surface for any scratches or other
damage.
Rubber Parts
Inspect the primary cup, secondary cup and dust boot
for wear or damage.
Clutch Release Cylinder / Push Rod Removal
and Installation
B649G15306018
Removal
1) Drain clutch fluid. Refer to “Clutch Fluid
Replacement: ”.
2) Disengage the gearshift lever link by removing the
bolt.
3) Remove the speed sensor (1).
4) Remove the clutch hose union bolt and disconnect
the clutch hose (2).
I649G1530017-02
I649G1530018-01
I649G1530019-02
I649G1530020-01
I649G1530021-01

Suzuki 2005 GSF1200 Specifications

General

Brand	Suzuki
Model	2005 GSF1200
Category	Motorcycle
Language	English