Engine Lubrication System: 1E-9
Specifications
Service Data
B649G11507002
Oil Pump
Oil
Tightening Torque Specifications
B649G11507003
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque Specifications: in Section
0C”.
Special Tools and Equipment
Recommended Service Material
B649G11508001
Special Tool
B649G11508002
Item Standard Limit
Oil pump reduction ratio 1.703 (72/46 x 37/34) —
Oil pressure (at 60 °C, 140 °F)
Above 300 kPa (3.0 kgf/cm
2
, 43 psi)
Below 600 kPa (6.0 kgf/cm
2
, 85 psi)
at 3 000 r/min.
—
Item Specification Note
Engine oil type SAE 10W-40, API SF/SG or SH/SJ with JASO MA
Engine oil capacity
Change 3 300 ml (3.4/2.9 US/lmp qt)
Filter change 3 500 ml (3.6/3.0 US/lmp qt)
Overhaul 4 600 ml (4.9/4.0 US/lmp qt)
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Main oil gallery plug 40 4.0 29.0 )
Oil pressure regulator 28 2.8 20.0 )
Oil pan bolt 14 1.4 10.0 )
Oil pressure switch 14 1.4 10.0 )
Material SUZUKI recommended product or Specification Note
Sealant SUZUKI Bond 1207B or equivalent P/No.: 99000–31140 ) / )
09915–74521 09915–74540
Oil pressure gauge hose Oil pressure gauge
attachment
))
09915–77331
Meter (for high pressure)
)
To Next Page
Loading...
Need help?
General
