4C-2 Rear Brakes:
Rear Brake Pad Inspection
B649G14306012
The extent of brake pad wear can be checked by
observing the grooved limit line “A” on the pad. When the
wear exceeds the grooved limit line, replace the pads
with new ones. Refer to “Rear Brake Pad Replacement:
”.
CAUTION
!
Replace the brake pad as a set, otherwise
braking performance will be adversely
affected.
Rear Brake Pad Replacement
B649G14306013
1) Remove the plug (1).
2) Loosen the pad mounting pin (2).
3) Remove the caliper mounting bolt (3).
CAUTION
!
Do not operate the brake pedal while
dismounting the pads.
4) Remove the pad mounting pin (2) and brake pads
with the rear caliper pivoted up.
5) Clean up the caliper especially around the caliper
piston.
6) Assemble the new brake pad (4), insulator (5) and
shim (6).
CAUTION
!
Replace the brake pads as a set, otherwise
braking performance will be adversely
affected.
“A”
I649G1020041-02
1
I649G1430002-01
2
3
I649G1430003-01
2
I649G1430004-01
4
5
6
I649G1430005-01
To Next Page
Loading...
Need help?
General
