1G-14 Fuel System:
Fuel Tank Removal and Installation
B649G11706019
Removal
WARNING
!
Gasoline is highly flammable and explosive.
Keep heat, sparks and flames away from
gasoline.
1) Remove the seat. Refer to “Exterior Parts Removal
and Installation: in Section 9D”.
2) Remove the fuel tank mounting bolts.
3) Disconnect the vacuum hose (1) and fuel hose (2).
4) Disconnect the fuel tank air breather hose (3) and
water drain hose (4).
5) Disconnect the fuel level gauge lead wire coupler
(5).
6) Remove the fuel tank.
Installation
Install the fuel tank in the reverse order of removal. Pay
attention to the following point:
CAUTION
!
Be careful not to bend the hoses.
Fuel Valve Removal and Installation
B649G11706020
Removal
WARNING
!
Gasoline is very explosive. Extreme care
must be taken.
1) Remove the fuel tank. Refer to “Fuel Tank Removal
and Installation: ”.
2) Remove the fuel valve (1).
Installation
Install the fuel valve in the reverse order of removal. Pay
attention to the following points:
WARNING
!
Replace the gasket washers (1) and gasket
(2) with new ones to prevent fuel leakage.
I649G1170014-01
1
2
I649G1170015-01
3
4
5
I649G1170016-01
1
I649G1170017-01
1
2
I649G1170019-01