Suzuki GSX-R600 User Manual

1I-13 Starting System:
Starter Clutch
1) Install the starter driven gear onto the starter clutch.
2) Turn the starter driven gear by hand to inspect the
starter clutch for a smooth movement. The gear
turns in one direction only. If a large resistance is felt
for rotation, inspect the starter clutch or the starter
clutch contacting surface on the starter driven gear
for wear or damage.
If they are found to be damaged, replace them with
new ones.
Starter Driven Gear Bearing
Inspect the starter driven gear bearing for wear of
damage.
Starter Button Inspection
B837H11906013
Inspect the starter button in the following procedures:
1) Remove the air cleaner box. Refer to “Air Cleaner
Box Removal and Installation in Section 1D
(Page 1D-7)”.
2) Disconnect the right handlebar switch coupler (1).
3) Inspect the starter button for continuity with the
tester.
If any abnormality is found, replace the right handle
switch assembly with a new one. Refer to
“Handlebar Removal and Installation in Section 6B
(Page 6B-2)”.
Special tool
: 09900–25008 (Multi-circuit tester set)
Tester knob indication
Continuity ( )
4) After finishing the starter button inspection, reinstall
the removed parts.
I837H1190034-01
I837H1190033-01
1
I837H1190037-01
Position
Color
PUSH
O/W Y/G O/R
Y/W
I815H1190019-01

Suzuki GSX-R600 Specifications

General

Brand	Suzuki
Model	GSX-R600
Category	Motorcycle
Language	English