Wheels and Tires: 2D-13
Rear Wheel Dust Seal / Bearing Removal and
Installation
B837H12406010
Removal
1) Remove the rear wheel assembly. Refer to “Rear
Wheel Assembly Removal and Installation
(Page 2D-11)”.
2) Remove the rear sprocket mounting drum assembly
(1) from the rear wheel.
3) Remove the dust seal (2).
Special tool
(A): 09913–50121 (Oil seal remover)
4) Remove the wheel dampers (3).
5) Remove the bearings (4) on both sides using the
special tool.
Special tool
(B): 09921–20240 (Bearing remover set)
6) Remove the spacer (5).
Installation
CAUTION
!
The removed dust seal and bearings must be
replaced with new ones.
1) Apply grease to the wheel bearings.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
1
I837H1240023-02
(A)
2
I837H1240024-02
3
I837H1240025-02
(B)
(B)
4
4
I837H1240026-02
5
I837H1240027-02
I649G1240019-02
To Next Page
Loading...
Need help?
General
