Starting System: 1I-14
Specifications
Service Data
B837H11907001
Electrical
Unit: mm
Tightening Torque Specifications
B837H11907002
NOTE
The specified tightening torque is also described in the following.
“Starter Motor Components (Page 1I-3)”
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List in Section 0C
(Page 0C-9)”.
Item Specification Note
Starter motor brush length
Standard 10.0 (0.39)
Limit 6.5 (0.26)
Starter relay resistance 3 – 6 Ω
Fastening part
Tightening torque
Note
N⋅mkgf-mlb-ft
Starter motor mounting bolt 10 1.0 7.0 )(Page 1I-4)
Starter motor lead wire mounting nut 6 0.6 4.5 )(Page 1I-4)
Starter motor housing bolt 3.5 0.35 2.5 )(Page 1I-5)
Starter clutch bolt 13 1.3 9.5 )(Page 1I-12)
To Next Page
Loading...
Need help?
General
