Fuel System: 1G-6
4) Disconnect the fuel pump coupler (1).
5) Place a rag under the fuel feed hose (2) and
disconnect the fuel feed hose (2) from the fuel pump.
CAUTION
!
• Be sure to disconnect the fuel feed hose
(2) by hand. Do not disconnect the fuel
feed hose (2) with any tool.
• When removing the fuel tank, do not leave
the fuel feed hose (2) on the fuel tank side.
6) Remove the fuel tank assembly.
Installation
Install the fuel tank in the reverse order of removal.
NOTE
Connect the fuel feed hose to the fuel pump
until it locks securely (a click is heard).
Fuel Injector / Fuel Delivery Pipe / T-joint
Removal and Installation
BA02J21706009
Refer to “Throttle Body Disassembly and Assembly” in
Section 1D (Page 1D-17).
Fuel Injector Inspection and Cleaning
BA02J21706010
Inspect the fuel injector in the following procedures:
1) Remove the fuel injector. Refer to “Throttle Body
Disassembly and Assembly” in Section 1D
(Page 1D-17).
2) Check the fuel injector for evidence of dirt and
contamination. If present, clean and check for
presence of dirt in the fuel line and fuel tank.
3) Install the fuel injector. Refer to “Throttle Body
Disassembly and Assembly” in Section 1D
(Page 1D-17).
Fuel Pump Removal and Installation
BA02J21706011
Removal
1) Remove the fuel tank. Refer to “Fuel Tank Removal
and Installation” (Page 1G-5).
2) Remove the fuel pump assembly (1) by removing its
mounting bolts diagonally.
CAUTION
!
Never disassemble the fuel pump assembly
(1).
2
1
IA02J1170007-01
IA02J1170010-01
1
IA02J1170012-03
1
IA02J1170013-02
To Next Page
Loading...
Need help?
General
