Suzuki RMX450Z Service Manual

5B-18 Manual Transmission:
Tightening Torque Specifications
BA02J25207002
NOTE
The specified tightening torque is described in the following.
“Transmission Components” (Page 5B-2)
“Gearshift Shaft / Gearshift Cam Plate Components” (Page 5B-12)
“Gearshift Construction” (Page 5B-13)
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C
(Page 0C-8).
Special Tools and Equipment
Recommended Service Material
BA02J25208001
NOTE
Required service material is also described in the following.
“Transmission Components” (Page 5B-2)
“Gearshift Shaft / Gearshift Cam Plate Components” (Page 5B-12)
“Gearshift Construction” (Page 5B-13)
Fastening part
Tightening torque
Note
N⋅mkgf-mlbf-ft
Bearing retainer screws 8.5 0.85 6.0 )(Page 5B-11)
Gear position switch mounting bolt 6.5 0.65 4.7 )(Page 5B-12)
Gearshift arm stopper 23 2.3 16.5 )(Page 5B-14)
Gearshift cam stopper bolt 10 1.0 7.0 )(Page 5B-14)
Gearshift cam driven gear pin 24 2.4 17.5 )(Page 5B-15)
Pawl lifter screw 8.5 0.85 6.0 )(Page 5B-16)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE “A” or
equivalent
P/No.: 99000–25010 )(Page 5B-9) / )(Page 5B-
9) / )(Page 5B-11) /
)(Page 5B-12) /
)(Page 5B-17)
Molybdenum oil MOLYBDENUM OIL SOLUTION — )(Page 5B-6) / )(Page 5B-
6)
Thread lock cement THREAD LOCK CEMENT SUPER
“1303” or equivalent
P/No.: 99000–32030 )(Page 5B-11) /
)(Page 5B-14) /
)(Page 5B-16)
THREAD LOCK CEMENT SUPER
“1322” or equivalent
P/No.: 99000–32110 )(Page 5B-15)

Suzuki RMX450Z Specifications

General

Brand	Suzuki
Model	RMX450Z
Category	Motorcycle
Language	English