Suzuki RMX450Z Service Manual

6B-11 Steering / Handlebar:
Specifications
Tightening Torque Specifications
BA02J26207001
NOTE
The specified tightening torque is described in the following.
“Handlebars Components” (Page 6B-1)
“Steering Components” (Page 6B-6)
Reference:
For the tightening torque of fastener not specified in this section, refer to “Tightening Torque List” in Section 0C
(Page 0C-8).
Special Tools and Equipment
Recommended Service Material
BA02J26208001
NOTE
Required service material is also described in the following.
“Steering Components” (Page 6B-6)
Special Tool
BA02J26208002
Fastening part
Tightening torque
Note
N⋅mkgf-mlbf-ft
Handlebar clamp bolt 25 2.5 18.0 )(Page 6B-4)
Steering stem nut 45 N⋅m (4.5 kgf-m, 32.5 lbf-ft) then turn
back 1/4 – 1/2
)(Page 6B-8)
Steering stem head nut 100 10.0 72.5 )(Page 6B-9)
Handlebar holder bolt 45 4.5 32.5 )(Page 6B-9)
Material SUZUKI recommended product or Specification Note
Grease SUZUKI SUPER GREASE “A” or
equivalent
P/No.: 99000–25010 )(Page 6B-5) / )(Page 6B-
8)
Handle grip bond Handle Grip Bond (commercially
available)
— )(Page 6B-5)
09913–70210 09925–18011
Bearing installing set (10 –
75 Φ)
Bearing installer
)(Page 6B-10) )(Page 6B-10)
09940–14911 09940–14960
Steering stem nut socket
wrench
Steering stem nut socket
wrench
)(Page 6B-7) / )(Page 6B-
8)
)(Page 6B-7) / )(Page 6B-
8)

Suzuki RMX450Z Specifications

General

Brand	Suzuki
Model	RMX450Z
Category	Motorcycle
Language	English