10-SIDE COVER COMPONENT 64
CHK
ADJ
NO. PART NO.
1
1251100-102000
Non-standard bolt M6×16
（
）
2
1274100-057095
Flanging bushing φ6.2×φ8.5×3.5
＋
3
1244100-052000
Buffer rubber of flanging bushing
（
）
4
－
Fig.1 SIDE COVER
COMPONENT
Side cover component 1
PROCEDURE:
●Side cover assembly
Use 4# inner hexagon to remove 4 bolts (1), take off the bushing (2) and cushion rubber
(3). Remove the 2 expansion nails at the back of the side cover assembly.
CAUTION:
●The parts should be protected during the disassembly process.
●When removing the buckle, pay attention to the strength to prevent damage to the buckle.
To Next Page
Loading...
Need help?
General
