ABB ACS880-04XT User Manual

Parameters 479
95.36 Supply voltage low Defines the low limit for the supply voltage allowed for normal
operation.
This parameter is active only when 95.35 Adjustable supply
voltage is enabled.
Note: This is an expert level parameter and should not be
adjusted without appropriate skills.
WARNING! An incorrect setting may cause the motor
to rush uncontrollably, or the brake chopper or resistor
to overload.
0.0
0.0...1000.0 V Supply voltage low.
95.37 Supply voltage high Defines the high limit for the supply voltage allowed for
normal operation.
This parameter is active only when 95.35 Adjustable supply
voltage is enabled.
Note: This is an expert level parameter and should not be
adjusted without appropriate skills.
WARNING! An incorrect setting may cause the motor
to rush uncontrollably, or the brake chopper or resistor
to overload.
0.0
0.0...1000.0 V Supply voltage high.
95.40 Transformation ratio Defines transformation ratio. 1.000
0.000...100.000 Transformation ratio.
96
96 System
Language selection; access levels; macro selection;
parameter save and restore; control unit reboot; user
parameter sets; unit selection; data logger triggering;
parameter checksum calculation; user lock.
96.01 Language Selects the language of the parameter interface and other
displayed information when viewed on the control panel.
Notes:
• Not all languages listed below are necessarily supported.
• This parameter does not affect the languages visible in the
Drive composer PC tool. (Those are specified under View
– Settings.)
-
Not selected None. 0
English English. 1033
Deutsch German. 1031
Italiano Italian. 1040
Español Spanish. 3082
Portugues Portuguese. 2070
Nederlands Dutch. 1043
Français French. 1036
Dansk Danish. 1030
Suomi Finnish. 1035
Svenska Swedish. 1053
Russki Russian. 1049
Polski Polish. 1045
Czech Czech. 1029
No. Name/Value Description Def/FbEq16

ABB ACS880-04XT Specifications

General

Brand	ABB
Model	ACS880-04XT
Category	Controller
Language	English