APRILIA RX 125 Service Station Manual

19.Seeger ring
20.Front hub pin
Removing the front wheel
CAUTION
UPON REMOVING, PAY ATTENTION NOT TO DAMAGE THE BRAKE HOSES, DISCS AND PADS.
•
Place the vehicle on its OPTIONAL rear service stand.
CAUTION
MAKE SURE THE VEHICLE IS STABLE.
HELPED BY ANOTHER OPERATOR, KEEP THE HANDLEBAR STEADY AND ENGAGED SO THAT
THE STEERING IS LOCKED.
•
Undo and remove both front calliper
fixing screws.
•
Remove the brake calliper.
CAUTION
DO NOT ACTUATE THE FRONT BRAKE LEVER AFTER
REMOVING THE WHEEL. OTHERWISE, THE CALLIPER
PLUNGERS COULD GO OUT OF THEIR SEAT, RESULTING
IN BRAKE FLUID LEAKAGE.
•
Working from the right side, loosen
both screws.
•
Working from the right side, unscrew
and remove the cover.
RX SX 125 Suspensions
SUSP - 141

APRILIA RX 125 Specifications

General

Displacement	124.2 cc
Max Power	11 kW (15 HP) @ 10, 700 rpm
Torque	11.2 Nm @ 8, 000 rpm
Fuel System	Electronic fuel injection
Transmission	6-speed
Rear Suspension	Monoshock
Front Brake	Single disc, 300 mm
Rear Brake	Single disc, 220 mm
Seat Height	905 mm
Weight	134 kg (dry)
Engine Type	Single cylinder, 4-stroke
Cooling System	Liquid-cooled
Front Suspension	Upside-down fork
ABS	Yes