APRILIA RX 125 Service Station Manual

Voltage regulator check
•
Output voltage 13.5 V - 15 V
•
Output current higher than 10 A (with
load)
Turn signals system check
Turn indicator device check
Check placing the tester probes on the poles:
+ / - 5.8 kOhm.
- / L (bulb) 5.3 kOhm.
- / L (bulb) 4.8 kOhm.
•
Undo and remove the screw and re-
move the protection glass with caution
so as not to break the fitting tooth.
•
Slightly press the bulb and turn it anti-
clockwise.Take out the bulb from its
fitting.
•
Upon replacement, insert a bulb of
equal rating in the bulb holder, making
the two guiding pins coincide with their
guides on the bulb holder.
RX SX 125 Electrical system
ELE SYS - 59

APRILIA RX 125 Specifications

General

Displacement	124.2 cc
Max Power	11 kW (15 HP) @ 10, 700 rpm
Torque	11.2 Nm @ 8, 000 rpm
Fuel System	Electronic fuel injection
Transmission	6-speed
Rear Suspension	Monoshock
Front Brake	Single disc, 300 mm
Rear Brake	Single disc, 220 mm
Seat Height	905 mm
Weight	134 kg (dry)
Engine Type	Single cylinder, 4-stroke
Cooling System	Liquid-cooled
Front Suspension	Upside-down fork
ABS	Yes