EasyManuals Logo

APRILIA RX 125 Service Station Manual

APRILIA RX 125
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #142 background imageLoading...
Page #142 background image
Place a stand under the tyre to keep
the wheel in position once it is free.
Slide off the wheel pin from the left
side.
Collect the spacer from the left side.
Remove the wheel by sliding it off from the front.
Checking the front wheel
CAUTION
CHECK THAT ALL THE PARTS ARE IN GOOD CONDITIONS, ESPECIALLY THOSE MENTIONED
BELOW.
BEARINGS
Turn the internal ring manually; it must rotate
smoothly, continuously and silently.
There must be no axial clearance.
The bearings presenting these problems must be
replaced.
GASKETS
Check that the gaskets are in good conditions; replace them if they show signs of damage or excessive
wear.
Suspensions RX SX 125
SUSP - 142

Table of Contents

Other manuals for APRILIA RX 125

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the APRILIA RX 125 and is the answer not in the manual?

APRILIA RX 125 Specifications

General IconGeneral
Displacement124.2 cc
Max Power11 kW (15 HP) @ 10, 700 rpm
Torque11.2 Nm @ 8, 000 rpm
Fuel SystemElectronic fuel injection
Transmission6-speed
Rear SuspensionMonoshock
Front BrakeSingle disc, 300 mm
Rear BrakeSingle disc, 220 mm
Seat Height905 mm
Weight134 kg (dry)
Engine TypeSingle cylinder, 4-stroke
Cooling SystemLiquid-cooled
Front SuspensionUpside-down fork
ABSYes

Related product manuals