EasyManuals Logo

APRILIA RX 125 Service Station Manual

APRILIA RX 125
219 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #94 background imageLoading...
Page #94 background image
Starter motor
STARTER MOTOR
Make sure that the toothing (1) is not
deformed or worn.
Make sure that the O-ring (2) is not
damaged or worn.
The electric starter motor is not fitted
for repair. If necessary, replace the
whole motor.
START-UP GEAR
Make sure that the gears (3) are not
worn.
The start-up gears must be blocked
with precision in one direction.
Removing the starter motor
Undo and remove the two fixing screws.
Remove the starter motor.
NOTE
THE STARTER MOTOR CAN ALSO BE REMOVED IF THE ENGINE IS FITTED TO THE VEHICLE.
Installing the starter motor
Place the electric starter motor.
Apply LOCTITE 221.
Tighten the starter motor fixing screws.
Engine RX SX 125
ENG - 94

Table of Contents

Other manuals for APRILIA RX 125

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the APRILIA RX 125 and is the answer not in the manual?

APRILIA RX 125 Specifications

General IconGeneral
Displacement124.2 cc
Max Power11 kW (15 HP) @ 10, 700 rpm
Torque11.2 Nm @ 8, 000 rpm
Fuel SystemElectronic fuel injection
Transmission6-speed
Rear SuspensionMonoshock
Front BrakeSingle disc, 300 mm
Rear BrakeSingle disc, 220 mm
Seat Height905 mm
Weight134 kg (dry)
Engine TypeSingle cylinder, 4-stroke
Cooling SystemLiquid-cooled
Front SuspensionUpside-down fork
ABSYes

Related product manuals