2-92
Confidential
3.8 Network Problems
3.8.1 Cannot make a print through network connection
(Wireless LAN model only) (Error code DE, EE)
■ How to reset the network setting back to its default printer settings.
(1) Press the Menu button while the machine is in the ready state.
(2) Press the or button, then the “Initial Setup” or “General Setup” will appears on
the LCD and press the OK button.
(Which will appear, “Initial Setup” or “General Setup”, depends on the model.)
(3) Press the or button, then the “Reset Menu” will appear on the LCD and press
the OK button.
(4) Press the or button, then the “Network” will appear on the LCD and press the
OK button.
(5) Press the 1 button, then the "Reboot OK? 1.Yes 2.No" will appear on the LCD.
(6) Press the 1 button, then the "Accepted" will appear on the LCD, and reset the
network setting back to its default printer settings, and the machine goes back to the
ready state.
User Check
• Check the descriptions in the network user’s guide.
• Reset the machine back to its default printer settings. (Refer to the following operations.)
• Check the connection of the network.
Step Cause Remedy
1
Harness connection failure of
wireless LAN PCB
Reconnect the harness of the wireless
LAN PCB.
2 Wireless LAN PCB failure Replace the wireless LAN PCB ASSY.
3 Main PCB failure Replace the main PCB ASSY.