Brother MFC-7365DN Service Manual

5-41
Confidential
2.4 Continue mode / Stop mode settings of Toner cartridge
You can set the machine to continue printing after the LCD shows “Replace Toner”. The
machine will continue printing until the LCD shows “Toner Ended”. The default setting is
“Stop”.
<Models with numeric keys>
(1) Press the Menu button, and then press the 1, 8 in this order.
(2) Press the or button to choose continue or stop.
(3) Press the OK button.
(4) Press the Stop/Exit button, the machine goes back to the ready states.
<Models without numeric keys>
(1) Press the Menu button.
(2) Press the or button, then the “1. General Setup” will appear on the LCD and press
the OK button.
(3) Press the or button, then the “4. Replace Toner” will appear on the LCD and press
the OK button.
(4) Press the or button, then select the “Continue” or “Stop” and press the OK button.
(5) Press the Stop/Exit button, the machine goes back to the ready states.
2.5 Drum Cleaning
■ Drum cleaning function overview
Install the plain paper into the manual feed slot and perform the cleaning of the drum.
<Operating Procedure>
(1) Open the back cover while the machine is in the ready state.
(2) Press the Clear and Menu buttons at the same time. “Insert the blank paper into the
Manual feed slot.” is displayed on the LCD.
(3) Install the paper into the manual feed slot.
(4) The drum cleaning is performed. “Please Wait” is displayed on the LCD.
(5) The paper is ejected from the back cover, and the drum cleaning is completed
(6) Close the back cover, and the machine goes back to the ready state.
Note:
• Printing is not guaranteed in the continue mode.
• If the toner cartridge is replaced, the machine returns to the default setting.
Note:
• When the error of jam during the drum cleaning, drum cleaning mode is canceled
automatically and becomes the error display.

Brother MFC-7365DN Specifications

Printing Specifications

print technology	Electrophotographic Laser
print speed	Up to 24ppm
print resolution	Up to 1200 x 600 dpi

Copying Specifications

copy speed	Up to 24cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning Specifications

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11” (letter)
scan resolution	Optical: Up to 600 x 2400 dpi

Paper Handling

paper size maximum	Up to 8.5” x 14” (legal size)
paper input capacity maximum	250-sheet capacity paper tray, single-sheet manual feed slot
output capacity maximum	100 sheets (face down), 1 sheet (face up)

Weight and Dimensions

unit dimensions	15.9” W x 15.7” D x 12.4” H
unit weight	25.6 lbs.
carton weight	32.6 lbs.
carton dimensions	20.7” W x 20.1” D x 19.4” H