Brother MFC-7365DN Service Manual

5-14
Confidential
1.4.9 Software version check (Function code 25)
<Function>
This function allows you to check the management information of the software programs
such as version information, check sum.
<Operating Procedure>
(1) Press the 2 and 5 buttons in this order in the initial state of the maintenance mode.
In the case of the model without the numeric keys; Press the or button. The
“MAINTENANCE 25” appears on the LCD. Then press the OK button.
The machine displays each of items described below on the LCD.
(2) Press the or button to check the next item.
(3) When the Stop/Exit button is pressed regardless of the display, the machine cancels the
operation, beeps for one second and returns to the initial state of the maintenance mode.
*1 How to display the check sum information
Press the OK button when its version information is displayed on the LCD to display
the check sum information. Press the OK button again to go back to the version
information display. Press the or button to check the next item.
*2 There are two types of check sum information which can be checked with this
function. This function checks if these two types of check sum information are
matched each other. When you press the OK button while “ROM Check Sum” is
displayed, check is automatically conducted for each ROM of each software part.
When the check sum is matched, “OK” is displayed on the LCD. When all ROMs
result in OK, “ROM Check Sum OK” is displayed at the end, and the operation is
finished. When the check sum of any ROM is not matched, “NG” is displayed, and
the display stops.
LCD Description
TOTAL: Ver A
*1
Main firmware version information(A): Revision information
PCL: Ver 1.00(P)
*1
Sub firmware (PCL/PS) version information
ENG: Ver1.00 Engine firmware version information
NET: Ver 1.00 Network program version information
i0801170900:0000 I-FAX firmware version information
B09014151027:AF57
*1
Boot program creation date
U09040911553:A668
*1
Main firmware creation date
D09041191021:2E8F
*1
Demo firmware data creation date
P09040031122:FC00
*1
Sub firmware (PCL/PS) creation date
ROM Check Sum Check sum self-diagnosis function
*2
Note:
• Regarding the version information (Network and I-FAX) of which check sum
information cannot be obtained, the check sum information is not displayed even
if you press the OK button.

Brother MFC-7365DN Specifications

Printing Specifications

print technology	Electrophotographic Laser
print speed	Up to 24ppm
print resolution	Up to 1200 x 600 dpi

Copying Specifications

copy speed	Up to 24cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning Specifications

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11” (letter)
scan resolution	Optical: Up to 600 x 2400 dpi

Paper Handling

paper size maximum	Up to 8.5” x 14” (legal size)
paper input capacity maximum	250-sheet capacity paper tray, single-sheet manual feed slot
output capacity maximum	100 sheets (face down), 1 sheet (face up)

Weight and Dimensions

unit dimensions	15.9” W x 15.7” D x 12.4” H
unit weight	25.6 lbs.
carton weight	32.6 lbs.
carton dimensions	20.7” W x 20.1” D x 19.4” H