Brother MFC-7365DN Service Manual

Confidential
CHAPTER 4 ADJUSTMENTS AND UPDATING OF SETTINGS,
REQUIRED AFTER PARTS REPLACEMENT
This chapter describes adjustments and updating of settings, which are required if the main
PCB ASSY and some other parts have been replaced. This chapter also covers how to
update the firmware.
CONTENTS
1. IF YOU REPLACE THE MAIN PCB ASSY................................................................... 4-1
1.1 Rewriting the firmware (Sub firmware, Main firmware)..........................................4-2
1.1.1 Checking firmware version .........................................................................4-2
1.1.2 Rewriting the firmware using computer ......................................................4-2
1.2 Initialization of EEPROM of Main PCB ASSY (Maintenance Mode: Code 01)......4-3
1.3 Setting by Country (Maintenance Mode: Code 74) ............................................... 4-3
1.4 Setting the Serial Number .....................................................................................4-3
1.5 Inputting the Adjusted Value of the Laser Unit ......................................................4-5
1.6 Acquisition of White Level Data (Maintenance Mode: Code 55) ...........................4-9
1.7 Operation Check of Sensors (Maintenance Mode: Code 32)................................4-9
2. IF YOU REPLACE THE LASER UNIT........................................................................4-10
2.1 Inputting the Adjusted Value of the Laser Unit ....................................................4-10
3. IF YOU REPLACE THE LOW VOLTAGE POWER SUPPLY PCB ASSY ..................4-14
3.1 Reset of Irregular Power Supply Detection Counter............................................4-14
4. IF YOU REPLACE THE DOCUMENT SCANNER UNIT / THE CIS UNIT.................. 4-15
4.1 Acquisition of White Level Data (Maintenance Mode: Code 55) .........................4-15
4.2 Scanning and Printing Check .............................................................................. 4-15
4.3 Placement of Scanner Unit in Position for Transportation
(Maintenance Mode: Code 06) ............................................................................4-15
5. IF YOU REPLACE THE PANEL UNIT ........................................................................ 4-15
5.1 Operation Check of LCD (Maintenance Mode: Code 12).................................... 4-15
5.2 Operation Check of Control Panel Button (Maintenance Mode: Code 13)..........4-15
6. IF YOU REPLACE THE LCD UNIT............................................................................. 4-16
6.1 Operation Check of LCD (Maintenance Mode: Code 12).................................... 4-16

Brother MFC-7365DN Specifications

Printing Specifications

print technology	Electrophotographic Laser
print speed	Up to 24ppm
print resolution	Up to 1200 x 600 dpi

Copying Specifications

copy speed	Up to 24cpm
copy resolution	600 x 600 dpi
copy reduction/enlargement	25% - 400% in 1% increments

Scanning Specifications

scanner type	Color Flatbed with ADF
document glass size	8.5” x 11” (letter)
scan resolution	Optical: Up to 600 x 2400 dpi

Paper Handling

paper size maximum	Up to 8.5” x 14” (legal size)
paper input capacity maximum	250-sheet capacity paper tray, single-sheet manual feed slot
output capacity maximum	100 sheets (face down), 1 sheet (face up)

Weight and Dimensions

unit dimensions	15.9” W x 15.7” D x 12.4” H
unit weight	25.6 lbs.
carton weight	32.6 lbs.
carton dimensions	20.7” W x 20.1” D x 19.4” H