Select and Print Multiple Jobs from the DocBox
Introduction
When you want to print one job in a DocBox you can select and print that job. However, you can
also select multiple jobs at a time. The table below shows the available options.
Select multiple jobs
Jobs Description
[All] Select all the jobs from the active DocBox.
[Jobs with available media] These are the jobs for which the required media are cur-
rently available in the paper trays.
[Jobs with label] These are the jobs that have a label. A label is a name
that helps you to identify certain jobs on the operator
panel, for example the name of a customer. The label
can be defined in the printer driver, in a job ticket or via
an automated workflow. For example, the label ‘Custom-
er XYZ’ can be added to jobs. Then you can select and
print all the jobs for 'Customer XYZ' at once.
[Printed jobs] These are the jobs that have already been printed be-
fore.
[New jobs] These are the jobs that have not been printed yet.
Manually Touch the required jobs one by one
Illustration
[43] Select multiple jobs
Select and Print Multiple Jobs from the DocBox
150
Chapter 8 - Plan the jobs
Canon varioPRINT DP line
To Next Page
Loading...
Need help?
General
