Make an easy copy
Introduction
An easy copy is a copy for which you only need to define a few settings before touching the Start
button
:
• One-sided or two-sided original.
• One-sided or two sided copy.
• Zoom.
• Media.
• Stapling.
• The number of copies required.
When you need more settings, you have to make a copy job instead of an easy copy job.
You must enable the [Easy copy job] in the Settings Editor.
When the [Easy copy job] is enabled in the Settings Editor, also the [Last used] template is
automatically opened after each copy / scan job. This means that you can easily make a number
of the same copies / scans without having to define the settings each time again.
Procedure
1.
Place the originals face up into the automatic document feeder (ADF), or place one original face
down on the glass plate.
2.
Select the [Easy copy job].
You select the [Easy copy job] template from the [Jobs] view: touch [Jobs] -> [Copy/Scan].
3.
If required, change the default settings and the required number of copies.
4.
Touch
.
The job is added to the list of [Scheduled jobs].
Make an easy copy
Chapter 10 - Carry Out Copy Jobs
231
Canon varioPRINT DP line
To Next Page
Loading...
Need help?
General
