1F – 392IENGINE CONTROLS
DAEWOO V–121 BL4
3. Install the IAC valve retaining bolts.
Tighten
Tighten the idle air control valve retaining bolts to 27
lb–in (3 NSm).
4. Connect the IAC valve connector.
5. Connect the negative battery cable.
6. Start the engine and check for the proper idle
speed.
MANIFOLD ABSOLUTE PRESSURE
SENSOR
Removal Procedure
1. Disconnect the negative battery cable.
2. Disconnect the negative battery cable.
3. Disconnect the Intake Air Temperature (IAT) sensor
connector.
4. Disconnect the breather hose from the valve cover.
Remove the air intake tube.
5. Disconnect the throttle cable from the throttle body
and bracket.
To Next Page
Loading...
Need help?
General
