9S – 14IBODY REAR END
DAEWOO V–121 BL4
2. Install the gas support assembly onto the body with
the bolts.
Tighten
Tighten the gas support assembly bolts to 8 NSm (71
lb–in).
3. Close the tailgate.
LUGGAGE COMPARTMENT LOCK
STRIKER (WAGON)
Removal Procedure
1. Open the tailgate.
2. Remove the luggage compartment rear trim panel.
Refer to Section 9G, Interior Trim.
3. Remove the bolts that secure the lock striker.
Installation Procedure
1. Install the lock striker with the screws.
Tighten
Tighten the tailgate lock striker bolts to 10 NSm (89
lbin).
2. Install the luggage compartment rear trim panel.
Refer to Section 9G, Interior Trim.
3. Close the tailgate.