INSTRUMENT/DRIVER INFORMATION 9E – 25
DAEWOO V–121 BL4
ASHTRAY
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the screws and the glove box.
3. Remove the screw and driver/passenger knee bol-
ster.
4. Remove the screws and the audio system trim
plate.
5. Disconnect the ashtray electrical connector.
Installation Procedure
1. Connect the ashtray electrical connector.
2. Install the screw and the ashtray housing.
Tighten
Tighten the ashtray housing screw to 2.5 NSm (22
lbin).
To Next Page
Loading...
Need help?
General
