Daewoo NUBIRA User Manual

HEATING AND VENTILATION SYSTEM 7A – 17
DAEWOO V–121 BL4
Installation Procedure
1. Install the temperature control cable eyelet to the
post on the controller.
2. Snap the cable housing connector to the slide posi-
tion on the controller.
3. Gently insert the controller into position on the cen-
ter console.
4. Install the four controller retaining screws.
Tighten
Tighten the HVAC controller retaining screws to 2
NSm (18 lb–in).
5. Install the temperature control cable eyelet to the
post on the temperature door lever.
6. Snap the cable retainer to the blower housing.
7. Move the temperature control to verify the smooth
operation and function of the door and the cable.
8. Install the audio system trim plate. Refer to Section
9F, Audio Systems.
9. Connect the negative battery cable.
10. Operate the heating and cooling systems to verify
proper function.
11. Install the glove box. Refer to Section 9E, Instru-
mentation/Driver Information.

Daewoo NUBIRA Specifications

General

Brand	Daewoo
Model	NUBIRA
Category	Automobile
Language	English